From d016a5796887b1bd8a69dd547caac2af21669020 Mon Sep 17 00:00:00 2001 From: Ian Moffett Date: Mon, 5 Aug 2024 22:17:28 -0400 Subject: soc: bus: Add support for single size DMA writes Signed-off-by: Ian Moffett --- sv/soc/bus/dmactl.sv | 74 ++++++++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 72 insertions(+), 2 deletions(-) (limited to 'sv/soc/bus') diff --git a/sv/soc/bus/dmactl.sv b/sv/soc/bus/dmactl.sv index 12ee45f..c0851c1 100644 --- a/sv/soc/bus/dmactl.sv +++ b/sv/soc/bus/dmactl.sv @@ -37,7 +37,11 @@ module dmactl #( parameter C0_MMIO_BASE = 48'h1000140, parameter C1_MMIO_BASE = 48'h1000153, parameter C2_MMIO_BASE = 48'h1000153, - parameter C3_MMIO_BASE = 48'h1000166 + parameter C3_MMIO_BASE = 48'h1000166, + + /* Channel control bits */ + parameter CCTL_START = 0, + parameter CCTL_WRITE = 1 ) ( input wire clk, @@ -46,57 +50,103 @@ module dmactl #( input logic [63:0] mmio_wdata, output logic [63:0] mmio_rdata, input wire mmio_re, - input wire mmio_we + input wire mmio_we, + + /* Memory bus interface */ + output wire mbus_re, + output wire mbus_we, + output logic [47:0] mbus_addr, + output logic [63:0] mbus_wdata, + input logic [63:0] mbus_rdata ); /* Channel 0 register set */ reg [63:0] c0_src; reg [63:0] c0_dest; + reg [63:0] c0_rdata; reg [15:0] c0_size; reg [7:0] c0_ctl; /* Channel 1 register set */ reg [63:0] c1_src; reg [63:0] c1_dest; + reg [63:0] c1_rdata; reg [15:0] c1_size; reg [7:0] c1_ctl; /* Channel 2 register set */ reg [63:0] c2_src; reg [63:0] c2_dest; + reg [63:0] c2_rdata; reg [15:0] c2_size; reg [7:0] c2_ctl; /* Channel 3 register set */ reg [63:0] c3_src; reg [63:0] c3_dest; + reg [63:0] c3_rdata; reg [15:0] c3_size; reg [7:0] c3_ctl; initial begin c0_src = 64'b0; c0_dest = 64'b0; + c0_rdata = 64'b0; c0_size = 16'b0; c0_ctl = 8'b0; c1_src = 64'b0; c1_dest = 64'b0; + c1_rdata = 64'b0; c1_size = 16'b0; c1_ctl = 8'b0; c2_src = 64'b0; c2_dest = 64'b0; + c2_rdata = 64'b0; c2_size = 16'b0; c2_ctl = 8'b0; c3_src = 64'b0; c3_dest = 64'b0; + c3_rdata = 64'b0; c3_size = 16'b0; c3_ctl = 8'b0; mmio_rdata = 64'b0; + mbus_addr = 48'b0; + mbus_re = 1'b0; + mbus_we = 1'b0; + mbus_wdata = 64'b0; end + task channel_rw; + input [63:0] c_inbuf; + input [47:0] c_src; + input [47:0] c_dest; + input [15:0] c_size; + input [7:0] c_ctl; + + if (c_ctl[CCTL_WRITE] == 1'b1 && c_size < 8) begin + /* Prepare to read data into buffer register */ + mbus_addr <= c_src[47:0]; + mbus_we <= 1'b0; + mbus_re <= 1'b1; + + @(posedge clk); + c_inbuf = mbus_rdata; + mbus_re <= 1'b0; + + /* Write data to dest */ + mbus_addr <= c_dest[47:0]; + mbus_wdata <= c_inbuf & (1 << (c_size * 8)) - 1; + mbus_we <= 1'b1; + + @(posedge clk); + mbus_we <= 1'b0; + end + endtask + always @(posedge clk) begin /* Handle MMIO reads */ if (mmio_re) begin @@ -154,6 +204,26 @@ module dmactl #( C3_MMIO_BASE + 16: c3_size <= mmio_wdata[15:0]; C3_MMIO_BASE + 18: c3_ctl <= mmio_wdata[7:0]; endcase + + if (c0_ctl[CCTL_START] == 1'b1) begin + channel_rw(c0_rdata, c0_src[47:0], c0_dest[47:0], c0_size, c0_ctl); + c0_ctl[CCTL_START] <= 1'b0; + end + + if (c1_ctl[CCTL_START] == 1'b1) begin + channel_rw(c1_rdata, c1_src[47:0], c1_dest[47:0], c1_size, c1_ctl); + c1_ctl[CCTL_START] <= 1'b0; + end + + if (c2_ctl[CCTL_START] == 1'b1) begin + channel_rw(c2_rdata, c2_src[47:0], c2_dest[47:0], c2_size, c2_ctl); + c2_ctl[CCTL_START] <= 1'b0; + end + + if (c3_ctl[CCTL_START] == 1'b1) begin + channel_rw(c3_rdata, c3_src[47:0], c3_dest[47:0], c3_size, c3_ctl); + c3_ctl[CCTL_START] <= 1'b0; + end end end endmodule -- cgit v1.2.3