diff options
Diffstat (limited to 'sys/dev/phy/et131x.c')
| -rw-r--r-- | sys/dev/phy/et131x.c | 226 |
1 files changed, 226 insertions, 0 deletions
diff --git a/sys/dev/phy/et131x.c b/sys/dev/phy/et131x.c new file mode 100644 index 0000000..52fac6c --- /dev/null +++ b/sys/dev/phy/et131x.c @@ -0,0 +1,226 @@ +/* + * Copyright (c) 2023-2025 Ian Marco Moffett and the Osmora Team. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of Hyra nor the names of its + * contributors may be used to endorse or promote products derived from + * this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +/* + * This driver is the product of reverse engineering + * work done by Ian Marco Moffett and the OSMORA team. + * + * Please refer to share/docs/hw/et131x.txt + */ + +#include <sys/types.h> +#include <sys/driver.h> +#include <sys/errno.h> +#include <sys/syslog.h> +#include <sys/mmio.h> +#include <dev/pci/pci.h> +#include <dev/pci/pciregs.h> +#include <dev/phy/et131xregs.h> +#include <dev/timer.h> + +#define VENDOR_ID 0x11C1 /* Agere */ +#define DEVICE_ID 0xED00 + +#define pr_trace(fmt, ...) kprintf("et131x: " fmt, ##__VA_ARGS__) +#define pr_error(...) pr_trace(__VA_ARGS__) + +static struct pci_device *dev; +static struct timer tmr; + +/* + * Software reset the ET131X + * + * @io: Register space + */ +static void +et131x_soft_reset(struct et131x_iospace *io) +{ + uint32_t tmp; + + tmp = ( + MAC_CFG1_RESET_TXMC | + MAC_CFG1_RESET_RXMC | + MAC_CFG1_RESET_TXFUNC | + MAC_CFG1_RESET_RXFUNC | + MAC_CFG1_SOFTRST | + MAC_CFG1_SIMRST + ); + + /* + * Reset the MAC core, bring it down. After that, + * we perform a global reset to bring the whole + * chip down. + */ + mmio_write32(&io->mac.cfg1, tmp); + mmio_write32(&io->global.sw_reset, GBL_RESET_ALL); + + /* + * Reset the MAC again for good measure, but + * this time a little softer. We already slammed + * the poor thing. + */ + tmp &= ~(MAC_CFG1_SOFTRST | MAC_CFG1_SIMRST); + mmio_write32(&io->mac.cfg1, tmp); + mmio_write32(&io->mac.cfg1, 0); +} + +/* + * Write to the PHY through MII + * + * @io: Register space + * @addr: PHY address + * @reg: PHY register + * @v: Value to write + */ +static int +et131x_mii_write(struct et131x_iospace *io, uint8_t addr, uint8_t reg, uint16_t v) +{ + uint16_t mii_addr; + uint32_t tmp, mgmt_addr_old; + uint32_t mgmt_cmd_old; + uint8_t ndelay = 0; + int retval = 0; + + /* Save MII management regs state */ + mgmt_cmd_old = mmio_read32(&io->mac.mii_mgmt_cmd); + mgmt_addr_old = mmio_read32(&io->mac.mii_mgmt_addr); + mii_addr = MAC_MII_ADDR(addr, reg); + + /* + * Stop any transactions that are currently + * happening on the MDIO bus and prepare the + * write. + */ + mmio_write32(&io->mac.mii_mgmt_cmd, 0); + mmio_write32(&io->mac.mii_mgmt_addr, mii_addr); + mmio_write32(&io->mac.mii_mgmt_ctrl, v); + + for (;;) { + tmr.usleep(50); + ++ndelay; + + tmp = mmio_read32(&io->mac.mii_mgmt_indicator); + if (!ISSET(tmp, MAC_MGMT_BUSY)) + break; + if (ndelay >= 50) + break; + } + + if (ndelay >= 50) { + pr_error("could not write PHY reg %x (status=%x)\n", reg, tmp); + retval = -EIO; + goto done; + } + +done: + /* Stop operations and restore state */ + mmio_write32(&io->mac.mii_mgmt_cmd, 0); + mmio_write32(&io->mac.mii_mgmt_addr, mgmt_addr_old); + mmio_write32(&io->mac.mii_mgmt_cmd, mgmt_cmd_old); + return retval; +} + +/* + * Initialize PCI related things for the + * chip. + */ +static void +et131x_init_pci(void) +{ + uint32_t tmp; + + /* Enable bus mastering and MMIO */ + tmp = pci_readl(dev, PCIREG_CMDSTATUS); + tmp |= (PCI_BUS_MASTERING | PCI_MEM_SPACE); + pci_writel(dev, PCIREG_CMDSTATUS, tmp); +} + +/* + * Blink both LEDs of the card + * + * @io: Register space + * @count: Number of times to blink + * @delay: Millisecond delay between blinks + */ +static void +et131x_blink(struct et131x_iospace *io, uint32_t count, uint16_t delay) +{ + uint16_t on_val; + + on_val = (LED_ON << LED_LINK_SHIFT); + on_val |= (LED_ON << LED_TXRX_SHIFT); + for (uint32_t i = 0; i < count; ++i) { + et131x_mii_write(io, 0, PHY_LED2, on_val); + tmr.msleep(delay); + et131x_mii_write(io, 0, PHY_LED2, LED_ALL_OFF); + tmr.msleep(delay); + } +} + +static int +et131x_init(void) +{ + struct pci_lookup lookup; + struct et131x_iospace *bar; + int error; + + lookup.vendor_id = VENDOR_ID; + lookup.device_id = DEVICE_ID; + dev = pci_get_device(lookup, PCI_VENDOR_ID | PCI_DEVICE_ID); + if (dev == NULL) { + return -ENODEV; + } + + pr_trace("Agere ET1310 Ethernet ctl <phy? at pci%d:%x.%x.%d>\n", + dev->bus, dev->device_id, dev->func, + dev->slot); + + /* Try to request a general purpose timer */ + if (req_timer(TIMER_GP, &tmr) != TMRR_SUCCESS) { + pr_error("failed to fetch general purpose timer\n"); + return -ENODEV; + } + + /* Ensure it has get_time_usec() */ + if (tmr.usleep == NULL) { + pr_error("general purpose timer has no usleep()\n"); + return -ENODEV; + } + + if ((error = pci_map_bar(dev, 0, (void *)&bar)) != 0) { + return error; + } + + et131x_init_pci(); + et131x_soft_reset(bar); + et131x_blink(bar, 4, 150); + return 0; +} + +DRIVER_DEFER(et131x_init, "et131x"); |